|
|
Below
are few words from some of our many happy customers.
If you would like to add your own comments please send it, along with your
details (as shown in the dark grey section) here.
Thankyou |
Customer - Bill Yeomans
Vehicle - BA XR8
Location - Young, NSW, Australia
Parts Purchased - BA Typhoon Legs |
| It’s a pleasant change that companies still exist that put customer service as a priority. I have been dealing with Adam at AWC through out the ordering, painting, shipping process and have found the service and contact exceptional. I have been notified of progress of my order almost daily, knowing exactly where it’s at and when it’s arriving. Can’t ask for more than that. Keep up the great work guys, Bill. |
Customer - Peter Styles
Vehicle - BA XLS Utility
Location - Newcastle, NSW, Australia
Parts Purchased - BA XR8/GT Carbon Bonnet, BF Pursuit Kit |
| For a while now I have run the second hand AWC Carbon XR8 bonnet, and have been extremely happy with its head turning ability, so when it came to getting a body kit on my ute, I knew where to go. After lengthy discussion with Adam over fitment details, kit adjustments, towbar issues and timing, I quickly learned that these guys know what they are doing. Never before have i found a company so focussed to meeting my needs. Rare in car modification companies these days.
I chose to have them paint and fit the kit to ensure i got the best result possible. In the discussions prior, the price was set out so I knew what the cost would be before the work, that they needed the car for only 24hrs, where to look for accomodation and on the day these guys even got me to and from my hotel. This is just unheard of....
The products on pick up spoke for themselves! The kit looked amazing and all the things that were expected to cause dramas had been overcome without hassle. The additional light in the rear bar looked great, the towbar smoothly integrated (into a bar that doesnt suit one at all), the xt light adjustment done very smoothly and all electricals tidy and operational. Mark showed me over it, told me things I should know to care for it and how to adjust if necessary. He even told me how to give new life to my bonnet to keep it lookin hot.
The most amazing thing however happened when i got home. One of the driving lights had blown on the way home from a faulty seal. Most companies would say when you call them back "mate it was working when it left here", but these guys just told me what to check to ensure it was broken and sent another one straight out. When i got the old one out, i asked if they wanted to send it back for warranty cost recovery. I was told just to keep it or throw it. So now i got a spare housing that can be resealed if needed and used in the event of a breakage. Hows that for after sales service!
Without even rolling on bling yet, the ute turns many a head and is even knocking the american's socks off on the web. If your thinking about pimpin your ride, you'd be mad not to drop these guys a line coz anywhere else wont even come close.
|
Customer
- Scott McGregor
Vehicle - BA MkII XR6T
Location - Queensland, Australia
Parts Purchased - BA
GT Rear Wing |
Having recently bought an XR6 Turbo MkII, and with the popularity of the
XR6's, I've been looking for ways to make mine look more unique. This is
how I found AWC. I purchased the GT Wing from them and took it to my panelshop,
only to be told the wing had a few flaws, possibly from rough handling,
that would lead to issues in the future. I contacted AWC immediately about
these faults, expecting the usual "We have your money so get bent" reply.
Right from the start, Mark offered to send a replacement wing. This threw
me. We don't get service like this these days, and to have a company concerned
with the happiness of their clients amazed me. The new wing arrived in excellent
condition. I cannot recommend AWC highly enough for their commitment to
quality and satisfaction. I have and will continue to shop with them.
|
Customer
- Andreas Brydhage
Vehicle - Subaru WRX
Location - Stockholm, Sweden
Parts Purchased - Carbon
Subaru Fog Light Covers, 22B Vents, 22B Blade, Guage Pod, and Fibreglass
22B Wing |
I have been dealing with AWC for nearly a year. And I must say they are
the best! Great service and very fast delivery times. For example I ordered
a set of fog light covers on a monday, and thursday the same week they arrived.
What can you say about that!!!! The quality of their products are absolutely
great. No matter if its carbon fibre or fibreglass. They even do some custom
work if you want somthing that they dont have. Like I said before, I live
in Sweden and carbon fibre parts are very hard to find over here. I have
orderd from other companys from all around the world. None of those companys
have been as good as AWC in Sydney. All I can say is if you are looking
for any styling for your car, always talk to AWC first.
|
Customer
- James Kingdom
Vehicle - "House of Kolor" Ford Falcon BA GT
Location - Sydney, NSW Australia
Parts Purchased - Ford
BA 8 Painted Engine Bay Set (FBAEBS8P) |
Having a one off Show Car, I needed the cold air induction system to blend
in with the rest of the cars features, and the decision to paint it in Blood
Orange makes it look as though it is not an add on but part of the original
build of the car. Having a custom bonnet, the guys at AWC had to also make
a one off custom cold air intake system to fit the car. Their commitment
to quality is seen in the finished product, and the comments made by viewers
of the car only confirm the term "Quality Control". Having also seen other
products manufactured by AWC, the customer can always be assured of products
that are not only of a high standard, but very competitive in the market
place.
|
Customer
- Nigel Hawkins
Vehicle - Ford Falcon AU Fairmont
Location - Canberra, ACT Australia
Parts Purchased - Ford
Falcon AU TS50 Rear Wing (FAUT3RW) |
Recently i contacted AWC for a price on a T3 wing for my AU Fairmont. AWC
provided me with a price cheaper than local bodykit shops, so obviously
I took it. Within three days, AWC contacted me again to inform me that my
wing was ready to be picked up, which was fantastically fast and it fit
into my scheduled trip to Sydney. Once i had arrived, I was able to fit
the wing within 15 minutes and I am very happy with the new look and quality
of their products.
|
Customer
- Joshua Muscat
Vehicle - Ford Falcon AU Futura
Location - Brisbane, QLD Australia
Parts Purchased - Ford
Falcon AU TS50 Full Body Kit (FAUT3) |
I've recently purchased an AUII Futura which I had plans to buy a full T3
TS50 bodykit for. I rang around everywhere for prices on the bodykit and
found AWC provided me with a very good price compared to everyone else.
It wasn't long before my kit was all ready and sent to my door. AWC provided
me with not only excellent prices and high quality products but exceptional
service as well. I've never had service so good before for anything i've
purchased. Not long after I had the bodykit fitted to my car and with a
couple little addon's, it turns ALOT of heads! I love it and couldn't be
happier with my purchase from AWC. Thanks AWC!
|
Customer
- Dwayne Woodhouse
Vehicle - Ford Falcon AU XR6
Location - Canberra, ACT Australia
Parts Purchased - Ford
Falcon AU TS50 Full Body Kit (FAUT3) Pursuit
Front Lip (FAUP250FL) |
When I purchased my AU3 XR6, I was pretty keen to change the look, so I
contacted AWC and they were only too happy to help me out. I went with the
TS50 Rear wing, skirts and bumper, and because my car is an XR, I went with
the Pursuit 250 Lip. AWC had my kit ready within a week, and since fitting
it, I haven’t looked back. AWC were prompt with parts, extremely reliable
and offered a price that no-one could beat. Pleased with the outcome and
very happy with AWC. I will be seeing them again for future purchases.
|
Customer
- Darren Gough
Vehicle - Subaru WRX MY01
Location - Melbourne, VIC Australia
Parts Purchased - Subaru
WRX 03 STi style B/Scoop to suit 01 shape WRX (SUWB246CBCF) |
I purchased a clear coated carbon fibre bonnet scoop through AWC for my
car. Adam and Mark ensured the process went smoothly with my order over
the internet. With-in 2 days it arrived on my doorstep boxed and bubble
wrapped. I was amazed by the quality of the finished product, the carbon
fibre weave was perfect, (I have seen some rather dubious imported products
that made me initially apprehensive about purchasing carbon fibre). After
removing the OEM unit it bolted perfectly in place and sits proud against
the metallic black finish on my bonnet, very impressive and gets many second
looks from passers by! Thanks to Adam and Mark, a great product and service
and would not hesitate to use AWC again.
|
|
.. 
